By DannyMackeyThis is a collection of open customs for everyone to use for any event that is using the new NAMT Settings. I would like to thank the work of @AaronLurie, @CMDeerfoot, @Double.D ッ, @Edy, @JackMProductions, and @Rocco. There are already 31 trucks in this first upload and there will be more added soon!
4 Wheel Parts - (Cohen) - Aaron Lurie Big Red - (DKP) - Devin Doss Brenthel Racing - (CRD) - Aaron Lurie Chillout - (PEI) - Edy Beltran Colin McRae Vision - (Concussion) - Devin Doss Dirtfish - (CRD) - Devin Doss Driving Skool - (PEI) - Aaron Lurie Eclipse - (DKP) - Edy Beltran El Chupacabra - (Concussion) - Edy Beltran Fare Play - (PEI) - Rocco Piergrossi/Chadwick Deerfoot Fastenal Racing Fast Track - (Cohen) - Devin Doss Fiberwerx Trophy Truck - (Concussion) - Devin Doss Fox Racing - (CRD) - Aaron Lurie Heatwave - (Concussion) - Devin Doss HPI Blitz - (PEI) - Aaron Lurie Intruder - (DKP) - Jack Meredith JDM Concept - (PEI) - Devin Doss Maximizer - (Concussion) - Aaron Lurie Maxxis Racing - (PEI) - Aaron Lurie No Label 44 - (Rummel) - Devin Doss Octon8er - (CRD) - Edy Beltran Pure Breed - (Willman) - Edy Beltran Pure Muscle - (DKP) - Aaron Lurie Pure Muscle 99 - (Racesource) - Aaron Lurie Spin Master - (CRD) - Devin Doss Steer Clear - (Cohen) - Devin Doss Surf Monster - (PEI) - Edy Beltran SWAT - (Rummel) - Edy Beltran Tonka - (Rummel) - Aaron Lurie Traxxas SST - (Racesource) - Devin Doss Wonder's Monster Loaf - (Cohen) - Edy Beltran Pack 2:
Big Delivery - (Cohen) - Edy Beltran/Aaron Lurie Hang 10 - (Concussion) - Danny Mackey Lawson Station - (DKP) - Chadwick Deerfoot Nitemare Expresss (PEI) - Edy Beltran No Limit - (Concussion) - Chadwick Deerfoot NOS Energy - (CRD) - Chadwick Deerfoot Poison - (PEI) - Andrew Wamsley Rat Fink - (CRD) - Andrew Wamsley (Original Design: Marcel Degen) Surf's Up - (Concussion) - Danny Mackey Udder Madness - (Cohen) - Edy Beltran THESE TRUCKS ARE ALL OPEN CUSTOMS. ANYONE CAN USE THESE WITHOUT NEEDING PERMISSION FROM THE CREATORS.
By DannyMackeyThis is the final release for the truck settings that will be used for the upcoming season of NAMT! These trucks have seen many iterations and changes over the past few months in the open beta, and I am very proud of the outcome. The handling of these trucks are drastically different from trucks normally used for Rigs of Rods.
In order to make building trucks with these settings as easy as possible, each truck is propped and textured so all that is needed is a body. Further, the trucks use a single texture to color many parts of the truck, including the chassis, shocks, swaybars, fourlinks, and rims. This will allow for retexturing these components to be faster and easier. Of course, those more experienced with truck building and Blender are welcome to add/change props used as they need.
The second zip in the download list is for building trucks. The zip contains 8 separate folders with all the files required to make a single, standalone truck for NAMT.
You can read about how to put a truck together here:
Cohen Concussion CRD DKP (Dark Knight Performance) PEI Racesource Rummel Willman Changes made to these trucks from previous V4 trucks:
Total weight reduced from ~22,000 lbs to ~12,300 lbs Total RPM increased from ~4,200 rpm to ~8,100 rpm Top speed reduced from ~68 mph to ~59 mph Currently tuned for standard stadium floor size Tire grip was tuned appropriately and more balanced between front and rear Each chassis uses a fitted node beam to improve geometry, suspension settings, and prop placement Total shock travel lengths reduced to more accurate length New flag structure that is visually realistic, weighs less, and is non-contactable New muffler sounds Working RII lights (CTRL+1, CTRL+2) Each truck is tuned with a specific suspension setting The Willman also features a more forward center of gravity as it is a front engine truck Trucks sport open and split differentials Trucks are tuned using shocks3 section instead of shocks2 (read more about them here: https://docs.rigsofrods.org/vehicle-creation/fileformat-truck/#shocks3) This has been a long and tedious process and I would like to thank all of you for your patience in waiting for this and NAMT to get going. I would also like to thank @Wambo for all his help building and tuning these trucks, as they would not be as good as they are without him. Lastly, thank you to all my beta testers and other contributors:
@AaronLurie (also provided new sounds)
Hello again. Here's three trucks I made some months ago, Madusa more recent. I did the setups on all them, so blame me if you find them not CRD enough. And another thanks for Chris Hamilton and Bryant Steggall for doing 106.7 The Fox and Madusa 2009 respectively. Very happy with how this came out.
I'm not sure who made what besides the biggest parts thanks to Marcelo's help with credits, but I know that all the props are found in Rockgod's PEI Pack. And I believe the shocks were in Rockgod's GD14 aswell.
Please dm me here or on Discord at Danny Werewolf#9179 if you know who made what.
Link 1 - Madusa 2009
Link 2 - 106.7 The Fox (2007 Pastrana)
Link 3 - Jetix 2007
A V1 Pack truck has come back from the grave, as Bob & Tom...of all trucks.
Unironically, this is one of my favorite trucks that was in the V1 pack for some reason, and due to @DiggerFan13 (The Gov) realizing that Toxic's body was close, he painted the truck for me. Honestly, this truck was made it maybe 8 hours tops and I just love how it looks, aswell as handling great. The truck's based on my Team Suzuki 2008 (Probably will release soon aswell) and it's overall not too different. The setup is more or less based on when Paul Cohen drove it.
This time, I'm pretty sure on the credits, but as usual, if you know anyone else that needs to be credited, DM me here or on Discord; Danny Werewolf#9179
First Wild Hair, now two trucks that I bet only a two dozen people care about. Jokes aside, I love this truck. It was originally started on for TLG Season 3 (Like alot of my trucks now that I realize), but got dropped because of issues with body mods. Thankfully, @DiggerFan13(The Gov) came along and helped with that, removing the racerback, sunvisor and the making the paint. Wave also made the Screamin' Demon logo. My part in all this is basically the setup n/b work and some other stuff. This truck is not easy to drive, because it's fun to drive. Gov also made a breakable version because why not.....And yes, it's 3 gears on purpose. The truck's more of a general representation of the truck, so that's why there's no racerback. Leaning more towards the one that ran late 00's, early 2010's anyway.
I know the body was an edit of the 2008 Blue Thunder body used in RockGod's PEI Pack, Racerback and Visor removed by Gov, but I'm not sure who modelled it, someone said it was Andrew though.
If you know anymore credits, or I made any mistakes in the main 3 credits, just dm me here or on Discord at Danny Werewolf#9179.
NOT AN OPEN CUSTOM. THIS IS MY RIDE FOR FBS
"You step inside my arena, its a reality check"
I have always been a fan of Doc, his persona makes for a very interesting stream and its amazing.
This truck is commemorate not only The Doc in all his glory but to commemorate the fact that i still have an ego sometimes on virtual monsters trucks.
"we are at the tippity top of the mountain, but were really only half way up"
(Disclaimer, i know the shocks are bluetooth connection right now, i will work to fix that soon, but not a huge deal to me at the moment)
By HydroツSomeone dissed me on using the wrong era logo so I tried again
By HydroツDm me at Hydroツ#6457 on discord for any questions or concerns.
By HydroツIm back. dm me any questions concerns or anything on discord Hydroツ#6457.
By DiggerFanThis is a replica of the 1st panel van Grave Digger monster truck (nicknamed "Grandma"), driven by Dennis Anderson. Leslie Anderson drove the truck in 1989, after Dennis built Grave Digger #2.
This pack contains 6 versions of the truck:
-1983-1985 (original blue & grey paint scheme)
-1986 (first appearance of the graveyard scheme)
-Late 1986 (as the truck appeared in a 1986 photoshoot, with a temporary set of 66-inch Goodyear tires)
While the truck doesn't feature an actual pulling hitch (the actual truck was never used for sled pulling), I included a hitch node in the node-beam, so that it can be used with the pulling sled. The hitch node is located on the pintle hook on the back of the frame. To use with a pulling sled, use the mouse to drag the chain on the pulling sled to the hitch node (press "K" to show the nodes if needed), then press "L" to lock the chain to the hitch. When finished, press "L" again to unlock the hitch. The headlights are fully functional. To turn the headlights on/off, press "N" Credits:
Body - @DiggerFan
Frame - @DiggerFan
Tires (1983-1985 & 1986 versions) - @DiggerFan
Tires (1987 & 1988 versions) - @RockCrwlr, modified & retextured by @DiggerFan
Tires (Late-1986 & 1989 versions) - @RockCrwlr, modified by @DiggerFan
Rims - @DiggerFan
Axles - @DiggerFan
Engine - @DiggerFan
Carburetors/Air Filters - @DiggerFan
Transfer Case/Transmission - @DiggerFan
Shocks - @DiggerFan
Bumpers - @DiggerFan
Driveshafts - @DiggerFan
Gas/Brake Pedals - @DiggerFan
Steering Wheel - @DiggerFan
Gauges - @DiggerFan
Seats - @DiggerFan
Leaf Springs - @DiggerFan
Engine Sounds - @Beau4x4
Node-beam - @DiggerFan
Thanks to @CIDRA racer, @Mark Iron, & Tim Smith for testing this truck.
If I forgot anyone, please notify me as soon as possible.
By DannyMackeyJust about 5 years after I released my previous personal truck, Haulin' Heat, I have a new ride for Sim-Monsters competition.
This is Speed Energy.
Featuring a Jeep Trophy Truck body inspired by Casey Currie's Jeep Pro Lite Truck, this truck sports a paint I originally painted almost 5 years ago for rFactor. I then followed up with the design about 3 years later. The truck made its way in-game, but never got close to completion, but now it's done. With the base truck coming from @Double.D ッ's newest Deja Vu, I finally completed a truck that has been 5 years in the making. I will be using this truck going forward for the few events I ever run in anymore. Hope you guys enjoy!
I finally got the NAMT version of this truck complete to use for FBS NEO. I am using new Toyo Tires that @SealedGecko modeled and @Edy textured. There is a second download for this update.
*THIS IS NOT AN OPEN CUSTOM*
By KillSwitchYo it's been a minute huh. If you're wondering where killswitch 4 is it was so bad that it made me change the whole design of killswitch
File 1: KillSwitch V
File 2: KillSwitch VI
Chassis - Outlawed
540 Merlin, Radiator & Fans, Fire Extinguisher, Fuel Cell - fernBurn
540 Merlin, Radiator & Fans, Overflow tank, Fuel Cell, BKT's, Body - Andrew Sheets
New BKT texture: Edy
N/B Setup, sounds, MSD Box - rockgod88
Shocks - Mark Colineri
Knuckles, Axles - Klayton
FTI Transfer Case, EFI Screen, ISP Seat, Gauges - Steele
Rear steer motor - dd908
Shifter, Power/Fuel switches - crazyman444
Transmission, Batteries - RockCrwlr
RII Box - DanDon
Driver Model - Helen Weales
If I missed anyone out let me know and I will credit you
oh yeah btw...... these aren't open customs @Dogecoin
By Swegliner849Ran this for HSL WF2 and not fall madness, gonna run this for FBS. This truck is basically a redone Sacrifice with a new name.
Not an open custom
Been a long time since i have uploaded, this truck i have had for a very long time. this was the special theme for IMTRS World Finals 2! i like it so much that this is going to be Hysteria 2.0 the new truck i run for leagues.
NOT AN OPEN CUSTOM
i dont have much more to say, just hope you enjoy driving this around.
By zero_massAnother low-effort and ridiculous custom truck on new settings.
By AndrocksFinally a Grave Digger that isnt slammed!
This truck is killer at racing, Enjoy!
built off of a Sweg truck, tires from the avenger 2019 pack & the body along with the rest are from BLZ 2019 GD35!
By zero_massThis is Bootis. They have friends.
Based on the stock NAMT Racesource with edits to the chassis/nodes and shocks. Aside from configurable differentials, this truck complies with NAMT Season 2 rules to my understanding.
Thanks to Ike for the idea, again. 😛
Hello, another mod from your least favorite fur on the site. This time, I swapped the NAMT Jurassic Attack and Maniac that Edy released almost a month ago, and put them onto the V4 node cause I generally like the V4 n/b better aswell as because I'm planning on using both of these in a tour I'm in. I hope this is fine because I did put a good amount of effort into it...mostly because the only meshes and textures used on both trucks were originally in the NAMT version. Here's everything I did that I can list off the top of my head, incase you're doubtful/curious.
- Body versions
- Made new setups for both (Jurassic Attack can power-wheelie just as easily)
- Both trucks are pretty good at racing
- Extended/shortened 4-link and sway bar lengths for new node
- Kept RII Lights Working (Says in vehicle description)
- Made Tires Collidible (See epic night screenshot above)
- Moved shock shaft holder to be closer to placement on Maniac
- Heavily edited/tweaked PEi Pack n/b to be closer to each chassis
- Repainted tie-rods to be closer to pictures I found
- Collidible wheelie bar! (Because why wouldn't you have one)
-A ton of moving the parts inside the .truck because I like doing that.
All the credits in the sidebar are the same as Edy's upload because basically nothing has changed with the truck aside from the nodebeam and the setup.
Just wanna say, thank you a ton Edy for making the truck in the first place. An accurate Jurassic Attack and Maniac is something people have wanted for so long, and it's wonderful to finally have them. This was a pretty fun litterally 4-day project to work on.
And yes, I got Edy's permission.
Its been awhile since I uploaded to SM, So I guess why not upload this truck for a league.
Now I want to improve on my future projects so anyone can tell me if there's anything I did wrong and I can fix them.
Now I'm Def Gonna mistake some of the makers of the props for sure. Sorry In advance, Please tell me and will Fix it.
By JJRAYX9So I was bored and made a State Farm truck. My first upload on the site! Special thanks to rockgod88 for giving me permission to upload this. It's a repainted Stone Crusher 2016. If you are familiar with skinzips, this will be easy. Extract he file you download into your content folder and drive. It has a red and white version, the white being default
texture- JJRAYX9 (me)
literally everything else- rockgod88
inspiration- Jake from State Farm
By Hydroツ19 Dollar Fortnite card, who wants it? Ok lets get real here, this is something im uploading for a friend who is no longer assoiciated with sim monsters and wanted it to get uploaded, this is a CLONE. Most of these parts i am not aware who made them, so if i mess it up please message me on discord or on the site (Hydroツ#6457)
As stated by the original creator everything was made by Crazy, Diggerfan, and Wambo.
By TheBostonRagGot around to updating this paintjob finally. Cleaned everything up and added the roof decal. Just a standalone version of this truck.
Rockgod88 - Original truck from Goldberg pack, updated NB
TheBostonRag - Paintjob and rims