Doomed User

I've been told that an error was found in Captain's Curse. A fix will go live tomorrow!

EDIT: Patch is now live!

Body wasn't me, that was built by Andrew, I just sent it

On 8/7/2018 at 10:24 PM, NtheDiggerfan said:

How are the pictures a lie? They're literally OF THE TRUCK. Cant fake pics.

Uh, yeah you could actually, you could take a pic of a truck that isn't yours and pass it off as what people are getting. Not saying you did but your point is incorrect, sir.

Not to mention, your response to the one review.. it doesn't matter if the truck you used had a 5 star rating, doesn't mean yours is good.

The props are also not up to date, as the engine is 2 years old, the radiators and the fuel cell are older, when new ones were just recently released earlier this year.

But you believe what you want to believe since you seem to have an answer for everything.

Really nothing more than putting Andrew's Legend body on the 34 chassis, with almost no differences besides a recolored chassis and beadlocks.

On 4/5/2018 at 2:56 PM, vegasfest said:

quick question, does it behave like a leafer?

The Grave Digger 5 he was semi-replicating was not a leafer. You may have it confused with the original Grave Digger 5, which was a leafer, but used in exhibition only.

I'd never thought I'd see Grave Digger on a Willman... Well done man!

If you run 0.3 exclusively, why even walk into this section?

K so you took a truck and added some new nodes to it. And you've done it with like 15 other trucks.

Whoop-dee-doo.

Just now, MonsterJam4Lyfe said:

Is it bad I never knew how to check the RoR log? How does one check it.

Nah, you're fine. Just go into Rigs of Rods/Rigs of Rods 0.4 (depending on which version you use, both are in Documents), and open the document entitled RoR with Notepad. There will be a lot of jumbled code but just look for anything that stands out as erroneous. It should give you clues on what you need to fix/remove/add/etc.

On 9/20/2017 at 11:08 PM, MonsterJam4Lyfe said:

The Burgundy 2009 ETL always crashes for me, on 0.4.6 and 0.39.3... What other parts do I need to fix it? All I can see myself is 'tracks/hotfire' when it crashes on 0.39...

Try checking the RoR log to see what the problem is. You may be missing a mesh.

14 hours ago, NitrousInferno said:

Would you consider any of the following: Nitro Circus (although with an extended cab), US Air Force Afterburner, pre-WF XIV Superman, An Escalade, and gray Mohawk Warrior? Would really be nice to see those late '00 to early '10 trucks in updated versions.

I had thoughts of making a new Escalade and Afterburner, but I'd have to get other projects out of the way first.

1 hour ago, OPSITTESPY13 said:

In defence I cant just add to the pa k over and over cause like I would have to re upload over and over.

You're not understanding. You convert the tracks first, and then add them all to the pack.

43 minutes ago, OPSITTESPY13 said:

I just wanted people to have some Good tracks and not live off these other ones. If u have a problem with it suck it up and don't be a little nice lady about it. It's America.

44 minutes ago, OPSITTESPY13 said:

People complain to much when i do things for them

47 minutes ago, OPSITTESPY13 said:

Honestly I have more so like no. But I'm not a selfish little kid 

You're not really doing anything for anyone, you're reuploading old tracks to the site and blowing up the downloads section. You've uploaded like 10+ tracks within the span of 2 days, blocking out the people who put time and effort into their trucks and upload them. I know I said earlier in another thread that people have the right to upload whatever they want as long as it follows the rules, but why not instead of uploading every track separately, make a pack of them and leave some space for others to breathe?

And I did not insult you so why do you feel the need to do so to me, especially since you haven't even been here for 6 months?

Do you need to upload every track you convert?

gud

7 minutes ago, racingrichardYT said:

ALL trucks? even trucks from .37

Yes. All trucks use the same file format, unlike terrains, which switched when the 0.4 version was released.

1 hour ago, racingrichardYT said:

can you give me some retro trucks that i can download .4

All trucks work with 0.4.

So before I download, if you credited yourself for nothing, what is different about this truck over the original?

Its a shame content has to be rushed out prematurely because people want to compete or complain.

Amazing trucks nonetheless.

dad

On 3/2/2017 at 5:21 PM, Jauisan said:

I Didnt Upload This To have it be anything major I made it as an edit you dont have to download its Your Choice I Uploaded this for fun i could care less if you have a problem with it.

Well instead of labeling it "Overkill Evolution 2016 V2" like you rebuilt the whole truck from scratch to match the 2016 version of the real life truck, you label it "Overkill Evolution Minor Edit" so people know that it was a small change and those who think otherwise will know not to be deceived.

Instead of being a d0uche about it why not try and take the advice to better yourself?

YES I LOVE YOU

YESSSSSSSSSSSSSSSSSSSSSSSS BIATCHESSSSSSSSSSSSSSSSSS

9 hours ago, joshzappy9 said:

Dont have that "foo"

Install it then?

1 hour ago, joshzappy9 said:

When i hit to download this file i got spammed with a pop up saying "You got a virus from this download" that literally took me 6 or 7 retries to finally close... Still got the download tho heheh...

Adblock foo

I LOVE YOUUUUUU

5 minutes ago, YiddishTunaPie said:

I didn't know there was an updated version, can you provide a link to it?

It's still a WIP, Connor Richardson is doing the paint.