Outlawed Posted April 8, 2013 Author Share Posted April 8, 2013 just a question is it possible for trucks to have swichable dif locks as some trucks runing dont apear to have front lockers/limited slip diffs, example: scoby doo,monster mutt dalmation, or is that asking for trouble with lag and setup? okay so I ran a test with a fellow staff member, with ROR's diff capability -open diff -locked diff -split diff (technically the diffs are open but the diff will give equal power regardless of wheelspeed, so in essence a all wheel drive system) right off the bat I can attest that adding a axle line to the truck file affects the truck immensely, wheelspeed and traction was up near tenfold (x10) from a box stock V4 truck, basically you could go from a dead stop to max top speed in under 2 seconds. An open front diff made the truck handle like old american rear wheel drive car with the front diff having no part in helping the truck pull at all, once you cornered hard, which you had to do to make it even take a set to turn, if the inside front tire came off the ground, power went 100% to the rear and resulted in some rather interesting situations and 9/10 resulted in a roll over. A locked front diff the truck was a freaking land missile, you had to quarter throttle around the turns or the truck would throw itself around immediately. basically you hit the throttle and it was going to go in the direction you were pointing with no finesse at all. Split diff in the front was interesting, it seemed to be a middle ground but like I stated above just adding a axle definition line to the truck file and a trucks throttle response and traction went up regardless of diff selection. We did a average run time on Arlington 2012, this was based on a 10 runs with the best 5 picked Locked ran a average of 18.324 and had the fastest time of any setup at a 17.83 Split diff averaged 18.648 (fastest time this setup got was a 18.20) Open diff averaged 19.448 (fastest time was 18.87) If this was the direction we would want to go this would require a good overhaul of the trucks traction and power setting to try and make it work, while this will be noted for future updates, this idea probably will not make its way into the update currently being worked on 3 Link to comment Share on other sites More sharing options...
weeone Posted April 9, 2013 Share Posted April 9, 2013 thats fair enough thanks for trying thow nice that you all care Link to comment Share on other sites More sharing options...
IceCreamMan13 Posted April 10, 2013 Share Posted April 10, 2013 Kind of a basic question, but will the PEI etc.. chassis trucks have a wheelie bar? Link to comment Share on other sites More sharing options...
Outlawed Posted April 10, 2013 Author Share Posted April 10, 2013 I modeled a few styles for them aswell as some of the other chassis's 2 Link to comment Share on other sites More sharing options...
Team Destruction Posted May 2, 2013 Share Posted May 2, 2013 So, when is there gonna be more previews? Link to comment Share on other sites More sharing options...
NavySonicShell Posted May 3, 2013 Share Posted May 3, 2013 When they want to. Link to comment Share on other sites More sharing options...
Klayton Posted May 3, 2013 Share Posted May 3, 2013 Don't worry, Johan and I have something big to show you guys soon 1 Link to comment Share on other sites More sharing options...
Team Destruction Posted May 3, 2013 Share Posted May 3, 2013 Oh I cant wait. Link to comment Share on other sites More sharing options...
MonsterJamFanOnROR Posted May 4, 2013 Share Posted May 4, 2013 I cant get .37 because it say I have to get rid of .38 or cancel the download Link to comment Share on other sites More sharing options...
Warwizard Posted May 5, 2013 Share Posted May 5, 2013 Just get rid of .38. .37 works better and you can use all of the trucks. the only annoying thing is restarting the game for a different track or truck. Otherwise, .37 is pretty awesome for simmonsters Link to comment Share on other sites More sharing options...
monsterjamcod0329 Posted May 5, 2013 Share Posted May 5, 2013 actually, you can have both versions, just need to put the versions into separate folders. 1 Link to comment Share on other sites More sharing options...
IceCreamMan13 Posted May 6, 2013 Share Posted May 6, 2013 For the V4.5 pack, I would really like to request if the engine and chassis, shocks etc.. were separate (like in the V2 trucks). I think It would help ALOT of people with re-texturing chassis. It may put a few more lines in the .truck file, but in my opinion It'd be great to see that. Link to comment Share on other sites More sharing options...
Outlawed Posted May 6, 2013 Author Share Posted May 6, 2013 all the trucks are in a blend with everything separated, as for meshes I doubt it, the only reason they were like that before was for deformities. since these do not work well online and cause lag, it makes more sense to make everything as one mesh. 2 Link to comment Share on other sites More sharing options...
Recommended Posts