Doomed User

I'm editing nodes for Avenger, and apparently the front swaybar link nodes and the front bottom 4-link nodes meet at the same point. I can't align the swaybar links onto their mounts without moving the 4-links off of theirs, and vice versa.

Here the 4-links are directly in front of their mounts (they're just a tad too short), but the swaybar links aren't lining up with their mounts because of the nodes. Moving the swaybar links to where they're supposed to be causes the 4-links to move out of position.

Any fixes/help?

2 hours ago, JUICY TOES said:

Does anyone happen to have a 1950 Chevy Body Bake?

I don't know if you intended it or not, but you spelled business wrong.

18 hours ago, Mark Colineri said:

That doesn't accurately answer the question he is asking.

The problem is, you have no inside faces on the body. Only one side of a face is visible. All you have to do to fix this, select the entire body, copy it and leave it exactly where it is. Then, flip the faces so they are not inwards instead of outwards, and change the texture to a fiberglass texture.

I thought that the video demonstrated how to add backfaces, my bad.

New Nine Inch Nails LP "Bad Witch" was announced earlier today and is available on June 22nd.

https://store.nin.com/collections/music/products/bad-witch-lp?variant=8645179179100

New album, new merch, new tour dates. It's a good time to be alive.

I've been rekindling myself with Deftones and Stone Temple Pilots recently, and it's been a huge trip down memory lane. I can honestly say that the 90's were the greatest decade for music, and I will forever stand by that opinion.

On 4/12/2018 at 8:45 PM, Jon Cannon said:

@Mr. Self Destruct Do you think you could upload a new mediafire link and update the download with it please?

Whew, those bodies were just bad V4 Ogre ports that I didn't even finish right. He'd probably be better off asking around for bodies but I could probably take some time over the week to re-rip and fix V4 bodies if he desperately needs them.

However, I also have a folder full of bodies and bakes but I'm not 100% sure if that belongs public since there are some bodies that were already released, or not meant to be released without being attached to a truck.

Sorry for the delayed response, school's been a b!tch and I haven't been able to do anything as much as I'd like to.

19 hours ago, EightBitMS said:

They're a business. Guns are a very hot button issue right now and to avoid anybody suing or protesting and making the company look bad they removed everything that could've posed a possible threat. We may not like it, but it's what FELD has to do to stay a business and bring us exciting Monster Jam action without politics getting in the way.

1 hour ago, Wave said:

FELD doesn't exactly care what's going on with other companies creating violent content, they only care if they are in the clear from any potential legal issues guns may bring to Monster Jam and their other motor sport events.   Eliminating guns from the trucks was the easiest possible solution, and now they don't even have to deal with potential problems other companies may face in the future.

I haven't kept up with Monster Jam recently but these are the most logical answers. Guns have always been controversial, so to avoid any of the controversy coming to the sport, they removed any gun references from their entire roster. With the amount of school shootings within the recent months, don't even think about them coming back any time soon, either.

3 hours ago, Karnag Gaming said:

Huge thanks for @Chazzymp for painting/sending me Jim's 3rd Quarter paint

Paint by @Swegliner849  and me

All paint by me

I'm like 90% sure that purple paint is just a badly proportioned rip of the one that was made in 2014.

Little late but whatever.

My first season of SMRA didn't go as well as I had wanted it to, but it was a great experience nonetheless. I met a lot of great people and all around had a blast for the events I was able to make. Can't wait for the next season to come around, and I look forward to coming back better than before!

Congratulations to Andrew and Damian for their respective championship wins, and thank you to Kozak and Chad for putting on a great season.

4 hours ago, red boy said:

 

Pouncer and Backdraft are still around. Dale Mitchell took over Pouncer after Ron Nelson went back to Bustin' Loose.

Fried Rice obviously

20 minutes ago, rockgod88 said:

Thought I had the Chassis fixed on MrD but went back and sure enough, had a few issues..

Should be on point now :/

Makes a world of difference, looks great!

2 hours ago, rockgod88 said:

why is the body so small.......?

Also redoing this for the PEI pack, was not satiated with Ferns with the wrong chassis, so Decided to fix it and add it to the pack.

Long post incoming.

From the looks of it, your chassis is wrong too.

I know I've said this a million times, but the chassis is closer to something like this (used Pouncer as an example).

From the looks of it, you took a new gen PEI and added some rods to make it seem like an older gen (used Hooked SUV as an example).

The Wall of Steel video shows a close up of the chassis and it's most definitely an older gen PEI, probably with some modifications done to it that can't be seen under the body.

I downloaded the chassis pack a while ago and also noticed that it was like that for a lot of the trucks in that pack, along with GD14.

3 hours ago, Garrett Hanson said:

this is the Show Your Projects thread not the Screenshots thread.
anywho rebuilt a truck for @ABgamerX needs some fixes thou

Please upscale that body and raise the shocks on it. The shocks shouldn't mount to the lexan. There are also a couple of node oddities, like hydros raised too high, swaybars/links not connected, etc. I would definitely take some time and make sure the nodes are 100% right before anything.

37 minutes ago, erhminer said:

 

That track looks dope man, I love how far you've come as a track maker. You haven't failed to impress me yet man! Keep it up!

3 hours ago, Medalwarrior215 said:

Monster Mutt Lowrider 

As much as I like seeing new content posted here, if you honestly meant that as a meme, then it should go in the Fail Pictures thread. Otherwise, I would take some time and make sure you 100% know what you're doing before throwing something together. I've seen some of your work around here and it's actually pretty good. Just take your time, and you'll definitely have something really good.

Idk, it's the weekend, maybe I'll have something to actually show for myself in a few days.

/endwordwall

Progress

Missing the fuel cell and headers but they will be added eventually.

Rocco

Maximum Destruction (Christensen CRD)

Ruiner#9976

5 minutes ago, rockgod88 said:

Past couple days:

My only critique is that the driveshafts and cages don't line up with the axles. Otherwise it's really good looking!

2 hours ago, TheBostonRag said:

Oh hey, it's another Digger paint. I wanted to remake this after I saw it in an old MTM2 video.

I was wondering when there'd be a Digger with that ribbon in the front, makes a nice touch.

Great work! Looks clean!

9 hours ago, Garrett Hanson said:

in my opinion just release racing & FS together as a whole cause there's no sense on releasing the racing version and not including the freestyle verson.
but ey. do what ever you please.

It's not a matter of what makes sense, it's a matter of you can either have one now, one later, or neither because Chris'll end up getting burned out on the project altogether.

No need to be passive aggressive, either.

As far as I know people still use 2.49 for creating and exporting. I personally use 2.79 for creating and 2.49 for exporting since I am not aware of any plugins compatible with newer versions. Welcome back nonetheless.

On 1/20/2018 at 12:39 AM, billothepillow said:

Incubus

Nice to see another Incubus fan on the site, cheers

Just now, nks1996 said:

is that a new dodge body model or an old one?

 

Newer, 2013 I think.

Custom in the works for stuff