Roach Posted September 19, 2012 Share Posted September 19, 2012 You stated escalade/mohawk, avenger, and taz were all mtm2 rips. While true for two of those avenger was never from mtm2. Believe what you want but it may not always be correct. 3 Link to comment Share on other sites More sharing options...
Klayton Posted September 19, 2012 Share Posted September 19, 2012 Actually thought I'd throw out there that Olander modeled that Taz. As for Avenger, I made one too...does that mean I used your old model as well?? 1 Link to comment Share on other sites More sharing options...
Patriotic Canadian Posted September 19, 2012 Share Posted September 19, 2012 You stated escalade/mohawk, avenger, and taz were all mtm2 rips. While true for two of those avenger was never from mtm2. Believe what you want but it may not always be correct. i didn't say it was an MTM2 rip, i just said "And avenger" because avenger was made as well, if your model was an MTM2 rip, i would've said so. Also, stop being a presumptuous cretin. Please and thanks Actually thought I'd throw out there that Olander modeled that Taz. As for Avenger, I made one too...does that mean I used your old model as well?? really, the old LF pack one? i swear i remember that LF said that it was an MTM2 port 1 Link to comment Share on other sites More sharing options...
Tom P. Posted September 19, 2012 Share Posted September 19, 2012 I believe the old LF one was either MTM2 or Urban Assault. Link to comment Share on other sites More sharing options...
Patriotic Canadian Posted September 19, 2012 Share Posted September 19, 2012 Well Urban Assault didn't have any "Liscenced" trucks in it, so that just leaves MTM. anyway, made this a while ago, never bothered posting it There's a lot of dirty edge loops in there. overall it's clean, but i should really mend some of them 14 Link to comment Share on other sites More sharing options...
Roach Posted September 19, 2012 Share Posted September 19, 2012 That is incredible PC! And as for the Avenger body. That was ripped from Urban Assault for V2. The V4 one Klayton made scratch. The V4 Taz body Justin made Scratch. The V2/V3 Taz/Tasmanian Devil body Brian made. Link to comment Share on other sites More sharing options...
Patriotic Canadian Posted September 19, 2012 Share Posted September 19, 2012 Well i was more talking about RKM's V3 "patch" body, which replaced the UA rip for some reason. And i haven't really touched V4 that much, so i don't know about any of the props in there. and again, i swear i saw him say in a server in the halcyon days of v2/3 that it was an MTM2 port. EDIT: and come to think of it, looking at it now, there's a few things wrong with it. the windshield on the real truck is much stouter, with the hood coming much higher, and it's got a really strange angle to it that i tried to get but it's more part of the windshield sill relations. i should probably redo the entire cab to get it right. and i think the nose curve is too lax on this as well. but that's an easy fix 1 Link to comment Share on other sites More sharing options...
monsterjamcod0329 Posted September 19, 2012 Share Posted September 19, 2012 Here is my track texture, just need to export it into ror which i have heard is a pain in the butt. Crowd, dirt, and car texture belongs to Sim Monsters Car model belongs to Aaron Lurie What your guys think? 1 Link to comment Share on other sites More sharing options...
NavySonicShell Posted September 19, 2012 Share Posted September 19, 2012 Here is my track texture, just need to export it into ror which i have heard is a pain in the butt. Crowd, dirt, and car texture belongs to Sim Monsters Car model belongs to Aaron Lurie What your guys think? Looks great, but like I said, needs a truck eating fence Link to comment Share on other sites More sharing options...
Klayton Posted September 20, 2012 Share Posted September 20, 2012 Well I finally got around to finishing the Path of Destruction banner. I knew there are quite a few truck angles that aren't exact but I don't care. The only things I didn't paint were the trucks, POD logo, and the original Monster Jam logo. The rest was handpainted. All I need to do now is cut the .png into sections so I can keep the HD quality. Note: May look off due to picture angle. 9 Link to comment Share on other sites More sharing options...
obsessionracing Posted September 20, 2012 Share Posted September 20, 2012 looks nice Rock Link to comment Share on other sites More sharing options...
Dalton Ward Posted September 20, 2012 Share Posted September 20, 2012 . What iv been working on.... 1 Link to comment Share on other sites More sharing options...
Patriotic Canadian Posted September 20, 2012 Share Posted September 20, 2012 that map won't work at all, but the model looks great Link to comment Share on other sites More sharing options...
Dalton Ward Posted September 20, 2012 Share Posted September 20, 2012 Thanks pc, as of right now its working fine. Do plan to re_map it though. Link to comment Share on other sites More sharing options...
Travis Posted September 20, 2012 Share Posted September 20, 2012 Looks great, Klayton. Love the quality. Only thing I can say about the banners is that they should probably be lengthened out a little more, trucks are a little too close to the logos. Link to comment Share on other sites More sharing options...
Recommended Posts