mdemko Posted February 16, 2012 Share Posted February 16, 2012 Kozak.... So many dead tubes.... Link to comment Share on other sites More sharing options...
Outlawed Posted February 16, 2012 Share Posted February 16, 2012 not really, this isnt a 1:1 scale truck, when this thing becomes a runner it will be beaten. I tried to minimize the amount of useless bracing, there are a few places I wish I would have made single length, bent pieces we will see once I add motion how well it holds up. Link to comment Share on other sites More sharing options...
Outlawed Posted February 18, 2012 Share Posted February 18, 2012 5 Link to comment Share on other sites More sharing options...
Outlawed Posted February 23, 2012 Share Posted February 23, 2012 3 Link to comment Share on other sites More sharing options...
Lookey2000 Posted February 24, 2012 Share Posted February 24, 2012 Im guessing its..... Avenger? Link to comment Share on other sites More sharing options...
Outlawed Posted February 25, 2012 Share Posted February 25, 2012 the post above it shows what body is going on it Link to comment Share on other sites More sharing options...
Mastertaco Posted February 28, 2012 Share Posted February 28, 2012 got my camera back also got a aluminum anti twist brackets too... Thinking of Making a old school wild hair replica that version 2 Link to comment Share on other sites More sharing options...
DDT Posted March 4, 2012 Share Posted March 4, 2012 Nothing custom just finished hooking up my Digger lights...i had to buy a normal light set with white head lights red brake so i used the brake lights as the red headlights and the white as a under body light to shine on my sponsor plates...looks really cool in the dark 1 Link to comment Share on other sites More sharing options...
Outlawed Posted March 5, 2012 Share Posted March 5, 2012 how are those MJ stampede's? Link to comment Share on other sites More sharing options...
DDT Posted March 5, 2012 Share Posted March 5, 2012 how are those MJ stampede's? pretty good actually...the price is good for the truck (about 225) and they are pretty durable. I have had mine for a few months and i run them hard and the only thing needed replaced was the spur gear, caster blocks when a idiot smashed into me....oh and the motor needed taken apart and put back together because i shook a gear loose on a hard landing on the read end. These trucks have plenty of power straight out of the box that they really dont need to be 4 wheel drive. Straight out of the box a full throttle take off will throw you into a great wheelie that will throw you over onto your side if your not careful with the throttle. If you plan on taking them out onto the dirt they will do just fine out of the box. If you break anything parts are cheap unless of course they are mechanical but what mechanical part from any brand is cheap. Since its a normal stampede you are not stuck with just the monster jam bodies/parts. The only thing i find i dont like about this truck is how i your jumping something like a curb that has a weird measurement angle the truck likes to noise dive ending in a end over end roll which the truck can withstand just fine. I could go on but to some it all up these trucks are great trucks for the price but dont expect them to be like the Clod busters Josh owns but these trucks dont deserve the negative comments they get because everyone expects them to be a hard core racing/freestyle truck that can withstand 35 foot drop from a jump it seems these clob busters can that cost almost if not then 4 times as much Link to comment Share on other sites More sharing options...
dirtracer9 Posted March 5, 2012 Share Posted March 5, 2012 you can BEAT a traxxas vehicle sensless and it will be fine.. my slash has seen more air than a skateboard at the x games.. and driven away... not to mention raced on a weekly basis for bout 2 years. 3 Link to comment Share on other sites More sharing options...
JoshDIGRhodes Posted March 5, 2012 Share Posted March 5, 2012 3 Link to comment Share on other sites More sharing options...
DDT Posted March 6, 2012 Share Posted March 6, 2012 Josh those Clods are looking great i will have to look into either buying one on ebay if a nice looking one pops up or building my self a digger one 1 Link to comment Share on other sites More sharing options...
Stephen Hopkins Posted March 9, 2012 Share Posted March 9, 2012 3 Link to comment Share on other sites More sharing options...
AaronLurie Posted March 18, 2012 Share Posted March 18, 2012 my traxxas maximum destruction 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now