Jump to content

V4 Customs

546 files

  1. Here is a pack I made and built myself. Everything is NOT mine. It was fun making, and finally make the final release of West Wind Training Center.

    If you would like the truck glow bar lights to glow, make sure you have the "glow" box checked in the graphics panel of your ROR configurator (**Warning: May Result in an FPS drop**).

    Thank you to those who gave me permission on some stuff and for helping me on some stuff.


    CREDITS:
    Hagan James - Putting together, Flag texturing
    Noah Chiasson - Paint
    unknown - Body
    Nicholas Kozak - Chassis, Special Event Truck's Shock models
    Johan Seminario, Michael Murray, Daniel Donnelly, Chris Hamilton - Props
    Mark Colineri - Updating Johan's props and chassis, shock models on revamped WWTC.
    Andrew Sheets, Nicholas Kozak - Beta testing
    326
  2. The final version of my ROR-MTP Truck, American Guardian!

    Very fun project, fun bringing back an old favorite of mine, to a up to date style design!


    Credits-

    Myself- Shocks, Rims, Paint, 4links, Fuelcell, Gauges, Flag, Flamethrower, swaybars, SwayBar Links, 4Links, Tierods, Knuckles, Driveshaft, etc.)

    Kozak- Chassis

    John Cannon- Body Baking

    Andrew Sheets- Chevy Body

    Klayton- Driveshaft, Axle, and swaybar link, Tire Textures

    Matt- Engine, Tire Model

    Chadwick- Locating the Side Graphics
    517
  3. This is a truck.

    Credits:

    V4 People for whatever
    Johan for Rims
    John for the body
    Kayton 4 Tyres

    I forgot some people, I'll add more credit later
  4. This is a truck that Chadwick has liked ever since its creation. Clydesdale is Chadwick's all time favorite truck, and he now has a good version of the truck to run.

    Credits:

    Chassis - Kozak
    Body - Andrew Sheets
    Tires/Shock Shafts+Mounts/Sway Bar Link/D-Ring - Klayton
    Paint - Chadwick
    Shock+Axle Modeling+Textures - Me
    Everything Else - V4/V4.5 Staff
    281
  5. Here is a truck that Bert wanted me to make for him to drive in the Truck Fest. The paint is based off of the 1994 version of Power Wheels, with a few custom touches as requested by Bert. The chassis underneath this truck is my custom PEI/CRD Hybrid. I spent a good amount of time making sure the paint was correct, and what Bert asked for. Hopefully you guys enjoy it as much as he does.

    Credits:

    Base Chassis - Kozak
    Body - Andrew Sheets
    Tires/Shock Shafts+Mounts/Sway Bar Link/D-Ring - Klayton
    Rim Insert - Edy
    Chassis Editing/Paint/Original Rim/Shock+Axle Modeling+Textures - Me
    Built Ford Tough Logo - Google
    Everything Else - V4/V4.5 Staff
    630
  6. Here are 2 (actually 4) trucks that have deserved some love for a very long time. Both of these names were dominant in the early years of Monster Trucks. Tom and I felt that they had not been properly represented in Rigs Of Rods.

    I spent a solid week putting everything together for Excaliber. I started with a Concussion which I heavily edited. I used an older Chevrolet to stay true to the Excaliber name. I made a brand new logo for the truck, and did all the paint work. I made brand new shock models, brand new axle models, and made sure everything lined up just right. I cannot be happier with how this truck came out

    Tom Papaccio and Jon Cannon spent time bring Executioner to life. Tom used the current Hall Brothers Racing chassis, and put a modern Chevrolet body on it. He did all the paint work by himself. Cannon is responsible for placing props and creating the shock set-up on the truck.

    Credits:

    Executioner:

    Chassis - Kozak
    Tires - Klayton
    Paint - Tom
    Prop Placing/Shock Set-Up - Cannon
    Everything Else - V4/V4.5 Staff

    Excaliber:

    Base Chassis - Kozak
    Original Body - DiggerFan
    Tires/Shock Shafts+Mounts/Sway Bar Link/D-Ring - Klayton
    Chassis Editing/Body Editing/Paint/Shock+Axle Modeling+Textures/Camel Flag+Rim Covers - Me
    Everything Else - V4/V4.5 Staff
    705
  7. Here is the Kicker sponsored EarthQuake from the 13th Mafia Racing camp. This is a concept truck that kinda just happened one night so enjoy
    Credits-
    All construction - AwesomeKong 13
    Prop placement - AwesomeKong 13
    EarthQuake name - AwesomeKong 13
    Concept - Taurus Racer 13
    Paint -Taurus Racer 13
    Rims -Johan
    Chassis - Outlaw chassis pack
    All other parts to the respected makers
  8. One of my favorite custom trucks i have runned, this was made for SSRS Season, but never got to qual to any event. I really like the style of the truck and how it turned out, hope you like it. Also it has no headers because i want to

    Credits:
    Body - Andrew Sheets
    Paint & design - Me
    Custom build chassis - Kozak
    Axles and some props - Crazy
    Rims - Johan
    Shocks & Tires Klayton
    Engine - SG
    Everything else - SM V4 Pack makers

    If i forgot/missed someone im sorry and please let me know
    200
  9. My First Custom to be Publicly Released is finally here!!! This is the Herbie Monster Truck that I will be using in any League or Fun Run until I can fix up Storm Tracker. If you would like to use it, Please message me before hand.

    *Credits*
    Alex Steinhaus (steiale) - Original Paint, Truck File Work
    Andrew Sheets (Andrew) - Body Improvements, Updated Paint
    Awesome Kong - Original Bug Body
    Dalton Widner (tddtwid) - Chassis Prop Placement, Truck File Work
    DanDon - Steering Wheel
    Mark Collineri - Rims
    Nick Kozak - Chassis Base
    Klayton Halogg - Tires
    Edy Beltran (coconutmen) - New UV Map
    Hagen James - Shocks
    327
  10. Here is my second custom, This one is kinda special to me because it started out as a drawing I did in school during my spare time. Once I learned the basics of photoshop and blender, I decided to make it for ROR to have a custom of my own to use in leagues, funruns etc... I'm very pleased with this one It turned out better than I thought it would and definitely turned out better than my first custom about 5-6 months ago.


    Credits:
    Paint and logo placement-Me
    Chassis-Kozak
    Chassis prop placement-Me
    Body-V4 team
    Tires-Rock
    Seat,Tcase,Knuckles,Splitshield-crazy
    Engine Model-Sealed Gecko
    Exhaust-Kozak
    Parts,Rims, etc...-V4 team
    204
  11. This is the all new Leafer pack class 2 . These trucks are lighter and faster than class 1 . There is 68 trucks in all  every truck has been rebuilt plus a ton of new truck to go with those. You will need Leafer pack Class 1 all so for everything to work right . for best results try to delete any of the old original leafers from the old packs because some meshes have a different name or at least copy and replace when asked . Please do not alter and reupload this pack for any reason     Please rate and review  thanks !!!
    All construction - Taurus Racer 13 
    Paint - 80% Taurus Racer 13 -  20% Mark barrett
    Thanks to Digger Fan , Blaze , and everybody who gave me parts or tested the 
    3,398
  12. Here's a little something special that was built for the MRoR summer Fairgrounds Series, but I decided to do a little extra with it (besides giving it the same name as my username lol). Included in this pack are the Dirty Dawg mega truck, and a monster truck version of it as well. This truck is basically a teammate to Bad Dawg, and will be used as such in the future. I reserve the right to run both versions of this truck in leagues and fun runs, but your more than welcome to message me about using them; I'm actually flattered if folks wanna use my custom trucks. Also, this truck should be stand alone; but if I missed something, just send me a PM.

    Credits are as follows:
    Paint was done by me.
    Truck was constructed by Colineri.
    Chassis parts and shocks were made by Kozak, and then edited by Colineri.
    Mud truck rims and tires were made by Colineri.
    Monster truck rims were made by Johan.
    Monster truck tires and engine were made by Wilkinson.
    Everything else to SM pack makers.

    If I missed someone, I sincerely apologize.
    613
  13. Here is my first truck! Im happy, please tell me it you have problems or need a file i will send it!


    Credits-


    Paint- Me

    Rims- Johan

    Chassis Setup- Awesome Kong 13

    Chassis and Body Mods- Taurus Racer 13

    Cloning- Taurus Racer 13

    Rest- V4 Makers
    258
  14. This truck is basicly a black GD20 chassis with a grandma body on it and yellow shocks and yellow rims and uncut tires.

    Credits

    Chassis- SMV4 Makers (Repainted and edited by me)
    Body- worldfinals
    Tires- SealedGecko
    Shocks- RockCrwlr (Repainted by me)
    Painting- rockgod88 (me)
    All other props- SMV4 Makers
    Truck file- rockgod88 (me)

    Please tell me if you like it or not and REMEMBER TO PUT IT INTO YOUR SMV4 FOLDER!
    Also if it dosent work Please dont mark it as broken, Just tell me and ill FIX IT.
    439
  15. This is a Volvo that only I run, k?

    CREDITS-
    -Google warehouse front clip
    -Codemasters for the rest of the body
    -People who made their respective parts, mainly people who worked with V4

    yay.
  16. A custom that Davynijland and I had created.
    Made because Indianapolis Colts are my favorite football team
    hope you guys like it

    Credits
    Skin: Me
    Chassis: Davynijland

    v4/v5 parts
    v4 pack makers
    v5 makers
    136
  17. Yeah I like changing things, get over it.

    Like I said in the SYP post, I feel that this more represents what I wanted Deja Vu to be, a mixture of retro style and modern parts. This will more than likely be the last Deja Vu truck to be made, unless I get the sudden urge to make another one.

    I do reserve the right to run this in any league and/or other various events.

    Credits!


    Paint- Myself, with the help of Chadwick Deerfoot

    Slight chassis edits- Myself and Christopher Hamilton

    Original Chassis, Headers, and Shocks- Nick Kozak

    In-cab props- Christopher Hamilton

    Body- DiggerFan

    Tires and Axles- Matt Wilkinson

    Fuel Cell, Rims, and Knuckles- Johan Seminario

    Sounds- Beau4x4

    Other various pieces and stuff- V4/4.5 Makers

    Also thanks to the people who helped beta test: Mason Watts, Aaron Lurie, Joshua Micks, Chadwick Deerfoot, and Jon Cannon

    If I left anybody out, I really do apologize. Just let me know and I will be sure to credit you in some form or fashion.


    YOU WILL NEED BEAU'S SOUNDPACK FOR THIS TO WORK INGAME
    283
  18. YOU NEED THE MJFANATICS MUD TRUCK PACK FOR THIS TO FULLY WORK

    My Mud truck for MROR Summer Series, Southeast Slinger!

    Credits
    Chassis-Kozak
    Body-DiggerFan
    Paint-Devin Doss
    Tires- Matt
    Rims - Johan(Edited by Aaron)
    4 links, Tie Rods, etc: Johan
    Other Parts-V4
    Props - Chris mostly
    610
  19. Mud truck to be used by Seth Holloway.

    Paint by Me
    Parts by Aaron/V4 people
  20. My mud/tough truck to use in MRoR's Fairground Series and anywhere else that applies. Request permission before use.

    Credits:
    Dylan B. - Truck Construction
    V4 Pack Makers
    Paint - Me
    684
  21. This pack includes 3 Mud Trucks:

    Aaron Lurie's Blue Bandit II
    Mason Watts' Flashback
    Devin Doss' Vertigo

    It was easier to release it in a pack since these 3 truck all used similar parts.
    Feel free to use any tires, rims, or other parts from this pack for your own truck!

    Credit:

    Body From Blue Bandit and Flashback: DiggerFan
    4 Links, Tie Rods, ect: Johan Seminario (Off of Mopar Magic)
    Paints for the trucks are made by their owners
    Tires: Matt
    Rims: Johan (Edited by me)
    Chassis: Kozak
    Various Other Parts: V4 Pack Contributors

    Thank you to everyone who helped with parts for these trucks!
    The owners of these trucks have the right to have first pick at them in any mud truck related events.
    1,635
  22. This is for me to use in any league that I drive in. If you want to use it, ask me on my sim monsters account. I used Mason Watt's Unstoppable's rims.
    197
  23. Well here it is, a custom iv'e been working on for quite some time.
    I don't own any rights to the 7/11 name or Slurpee name.
    Special thanks to Dylan Bernier for doing pretty much all of the work on the truck except the Body, although Dylan he speced map the body.
    Credits go to various SM Members!
    Enjoy the truck!
    253
  24. First truck i made.
    none of the parts are mine originally except the body texture.
    all parts from V4 pack
    new to all this. Let me know how it is
    i dont want to take credit for this i just put it together and it was not easy!
    if any of the parts are missing leave feedback and i will re-upload

    Enjoy !


    Fixed the spoiler

    this is the complete truck file

    fixed paint or attempted to
    806
  25. ***You Need the V4.5 Tires for this to work****
    Credits-
    Tires: Klayton
    Paint: Chadwick
    Body: Whoever made Auto Value King Krunch
    Chassis assembly/Exporting and positioning: Me
    Rims: Mark
    Shock Textures: Mark

    **Youtube link to my uncles actual car:
    Fastest pass its ran this year is a 5.92 all motor, spray comes later ***
    240



×
×
  • Create New...