V4 Monster Trucks
Monster trucks for the latest version of Rigs of Rods. Trucks in this category should be standalone unless stated otherwise, the V4 pack should not be required for this content.
798 files
-
Well here it is folks.
After nearly 6 years of planning, modeling, painting, building, scrapping, (rinse and repeat a few times), my dream ride is finally here. It took longer then I wanted, but the end result surpassed my expectations. There are so many people to thank who helped me with this project along the way, and if I forget someone I apologize. Please note that this is my personal custom and is not open for others to use in Sim Monsters sanctioned leagues and events, if you want to use it you must ask my permission first.
Paint and chassis design- @Mr. Beardman
Chassis and nodebeam construction - @Outlawed
Wheels - @acdcfan56
Tires and body - @Andrew
Shocks - @RockCrwlr
Engine - @Wambo
Various other parts and truck construction - @Ghostx
Radiator and fans - @crazyman444
Gauges - @RKM
Everything else to the V4 Pack makers.
Also shout outs to @dd07205, @tddtwid, @Jon Cannon, @Mark Colineri, @Nitro Psycho, @CIDRA racer, @iZonarYT @LordFrosting, @Zach Nicholas, @Double.D ッ, @DannyMackey, @monsterjamcod0329, @restored429, @JoshDIGRhodes, @JonnyZimmer2, @Mark Iron, and @NavySonicShell for helping with the project in various other ways including helping with earlier versions of the truck, suggestions for the build, and beta testing.
To everyone that I tagged in this post I sincerely say thank you for helping bring this beast to life, it means a lot to finally have what was once just a dream now a reality.
Truck is tested and working in 4.6, that's the version it was made for and that's the only version I'm worrying about.
#ThingsAreAboutToGetHairy
By CMDeerfoot458 0 -
0.4
Another truck I thought I might as well upload. Not 100% accurate to the real life version.
Blender work - me
Chassis - Outlawed
Engine, fuel cell - fernBurn
Everything else - SM Community
By stimson1222,669 26 -
Felt in need of a "personal" truck for leagues like namt or smra, this is the 2nd Cooldown truck (first one was a bad repaint on blaises fired up) and it turned out pretty good. Has working lights, press "n" to turn them on.
Credits:
Me
Blaise
Fern
Andrew
Blake
Sm Community
NOT AN OPEN CUSTOM, IF YOU WANT TO USE THIS FOR ANY FUN RUN OR LEAGUE YOU HAVE TO ASK ME FOR PERMISSION.
By Swegliner849486 2 -
Another project that i lost interest in, decided to upload it instead of scrapping it and never touching it again, if you want to make a better version of this, go for it. Includes the wf19 display truck attempt too. not as good as what i can do now.
Credits:
Me
GDFAN14
Chazzy
Fern
Andrew
Blaise
Sm Community
By Swegliner8491,378 4 -
I did the paint a while back and decided to actually make the truck so this is a late tribute to the late Chester Bennington 1976-2017.
Cloning/Paint: Me
The rest of the truck: The SM Community
I'm not sure if it works for .38 but it does work on .4 just to clarify things
(i'm not good at giving credits)
It is standalone
180 1 -
0.4
A custom Excaliber I just finished putting together, decided to upload it.
Blender work - me
Chassis - Outlawed
Body, Rollbar - Diggerfan
Engine, Fuel Cell - fernBurn
Paint - Diggerfan, small edits by me
Everything else, SM community.
Anyone is free to use this truck in any leagues, just message me on here first so I know!
Enjoy!
By stimson1221,143 4 -
First test thingy of these crappy rcs. yay.
they dont like giant jumps or anything. they weight 13 tons.
Creds
me- nb ,props, paint edits, everything .truck wise
SM- og props
By rockgod881,074 11 -
Once again the Handcuk mobile is back.
Blz-Chassis, nb, axle edits, shock edits, lotta edits
Micah- very nic paint, testing
t dot ray- testing
marcelo- testing
mr dough- tires before edit
SM community- other shiz i cannot remember at 1 am
Should be standalone, lemme know shiz to fix
By rockgod882,226 10 -
Deja Vu's 5th Anniversary and it's new team mate, Vertigo. I still hate making trucks.
Vertigo is an open custom! You do not need my permission to run it in anything that allows customs!
Credits:
Paints: Myself and Chadwick Deerfoot (Flames)
Body and tires: Andrew Sheets
Chassis: Kozak
Rims: Johan Seminario
Engine: Wambo
Sounds: Beau Smith
Original truck file and prop placements: Blake Thompson
Peer pressuring me into switching from the Ford body to the Dodge body: Jack Merkle and Aaron Lurie
If I left anyone out of the credits, please let me know and I will update them.
By Double.D ッ670 0 -
(UPDATE)
New version of GD5 with the actual chassis coming soon!
Wipped this truck up in an afternoon and it turned out fantastic! I even added the green chassis version. (I know that the real #5 with the green chassis had silver 4 links, but I didn't feel like changing them.)
Credits:
Rockgod88: Awakend chassis
Me: paint
Harlow: Grave Digger body
By TheBostonRag972 11 -
Black Widow I'll be running in customs leagues, including NAMT.
Before people say it doesn't work. This is in the .4 files so it WON'T work in .3
Credits:
Andrew - Body, Merlin 540, Fuel Cell, Tires
Fern - Merlin 540, Fuel Cell, Rims, Fire Extinguisher
Kozak: Chassis
Klayton: Shocks, Trans
Myself: Paint, Swaybars, Most Interior
And anyone else I might have forgotten.
By Steele690 5 -
Updated version of big sweed with a new body shock setup etc will run his on tours as my own custom
Originally gd legend so credit to everyone that made that truck and carkiller458 for the paint
works for both .4 and .3
By David65292 5 -
STANDALONE
This was a repaint of the custom CRD Jester which is cloned and ready to go!
Credits:
Paint: Me
Truck: GDFAN14
Testing: Me
Cloning: Karnage Gaming
Tires: Andrew
If I forgot anyone please tell me below.
By erhminer279 4 -
Well, here she is. Fuel Injection 3. This name has gone through a little bit of adventure in the last year or so, and has seen a lot of changes. Finally found a long term design and setup.
This is NOT an Open Custom, anyone who wants to use this in a league/fun run must ask me permission first, and there's no guarantee that I'll say yes.
Paint: @Mr. Beardman
Node/Beam, Prop placement, Chassis texturing: @rockgod88
Blender Work: @Hagan Moskau
Cloning, Flags, Shock Setup: Me
Props: Various makers
If you see something that is yours and want credit, contact me, I'll make changes if needed.
Hope you guys enjoy my first file posted to SM.
By LordFrosting562 11 -
The Zone Out Racing Team has been hard at work for the past year or so completely redoing the old truck and making her a whole new beast. New Engine, New Shocks, New Tires, New Rims, I could go on but I think everyone gets the point. Hotline Miami V2 is a completely new machine ready to tear up any competition that stands in its way, running a classic 65 Chevrolet Body that is sure to turn heads and leave the rest of the competition staring in awe and jealousy.
So we finally got her all buttoned up and ready for release, truck is standalone and will only work in .4 and up. Please do not extract this truck into any folders, leave the .zip as you download it and place it in your vehicles folder. Everything will show up properly and you wont have any problems. The download comes with 3 versions of the truck as seen in the photos above. BKT Tires, Independent with SIR's and a bodyless that runs BKT's. Of course you can change the tires out as you please for the bodyless version or really any of them for that matter. This truck is not an open custom so please do not sign up in it for leagues or fun runs without asking for my permission first as I might also want to sign up and compete in it. Thanks and Enjoy!!!! Also, if you haven't make the move to version .4.6 so you can play around with this beast
AGAIN I WILL REPHRASE!!! THIS TRUCK IS STANDALONE DO NOT EXTRACT IT AND IT IS NOT COMPATIBLE WITH VERSIONS BELOW .4 DO NOT COMPLAIN BECAUSE IT ISN'T "working in .39"
Credits:
Paint and .png modifications: iZonar
All the pretty parts on the motor and rims and probably a bunch of other stuff too: Andrew/Fern
Putting the truck together: Blake
Truck Testers (shoutout to y'all bois): Jon, Matt, Chadwick, Blake, and Brandon
If anyone else would like to be recognized for their work on parts of the truck, please PM me and I'll make sure to update this credit section accordingly.
Quick aside here: So it seems like there is concern about frame drop in this truck and I've had people with multiple different pc configurations run the truck and all have reported back little to no noticable fps drop. So if you're having issues, make sure RoR is the only task running on your pc, or lower your settings.
By ZonR1,010 15 -
This truck was made last summer & here it is.
Cloning: Me w/ help by @ABgamerX
Paint: Me w/ help by @ABgamerX (He clone the shocks, chassis & rims BTW)
Original Truck: Marvel by @ABgamerX
By Anthony236 1 -
Something i put together quickly back in december, haven't touched it since then. Matthew Tyrell won the WRA world finals 3 racing championship on this truck too.
Credits:
Me
Taurus Racer 13
Fern Burn
Kozak
RockCrwlr
SM community.
Enjoy!
By Swegliner8491,164 5 -
This is my fully redone paint for the Great Clips MHW.
Credits:
Paint- @FloridaBoyAutoRacing
Rims And Flag- Giovanni (Destruction_Maximum)
Mohawk- @fernBurn
Tires, Batteries - Klayton
By FloridaBoy1,725 8 -
YOU WANTED IT YOU GOT IT LOOK FOR MORE STUFF IN THE FUTURE side note THE UPDATED VERSION WILL BE ADDED SOON PLEASE BE PATIENT
CREDITS
BODY: MYSELF
PAINT @Chazzymp
TRUCK BUILDER @GDFAN14
CHASSIS: @Outlawed
TRUCK TESTERS @GDFAN14, @Chris B, @levimadnessschones, @Chazzymp
OTHER PROPS: SIM MONSTERS COMMUNITY
By nks19963,420 23 -
Hello everyone! Today I am sharing with you my latest piece of content. It's no where near perfect but I need it to be on SM so I can use it for a league so... Here is my decently made Brutus that was run last year by Brad Allen. Credits go to Blaise for making the original truck. All I did was update rims and paint. Enjoy!
Credits:
Me: Paint and Rim updates
Blaise (rockgod88): Original truck.
Notice: This is cloned and working for all versions that I know of. PM me if it doesn't work and I'll try to help. This should be a standalone pack. Constructive criticism is appreciated!
By Nathan H.1,605 8 -
These are two very awesome paints that I wanted to replicate to give people that nostalgic MTM2 feeling.
Credit:
Harlow: Maximum Destruction Body and GD Body
Blaise: nodes
Me: paints and cloning
Other people I don't know about.
By TheBostonRag1,166 3 -
Had this sitting around for a while and decided to update it and release it.
Credits
Sounds- @xunlex
Cloning/Re-Paint- Me
Hagan Moskau- Truck Building
By FloridaBoy679 34 -
This is Soldier Fortune 2018. My first Upload to Sim Monsters, I won't be posting a lot because of internet issues, but when I get chances I will upload the good stuff.
Credits-
Chassis/Blender stuff @GDFAN14
Paint @John Dough
1,359 7 -
2013 version if Marc McDonalds Black El Toro Loco
Credits-
Cloning and tire changes- @FloridaBoyAutoRacing (he gave me perm to upload this)
Paint- Blaise
Chassis- Koozak
Tires- @John Dough
By ROARChaos813 3 -
This Is My First Ever Custom Truck And I Would Like To Thank My Friend For Helping Me Put It On A Truck.
Paint : Me
Everything Else : @FloridaBoyAutoRacing
401 0